คำอธิบาย
Insta360 Ace Pro Dive Case 60m เคสแท้กันน้ำลึกได้ 60 เมตร
Waterproof to 197ft (60m).
Glass lens for better image quality.
Sliding buckle design to keep the camera safe and secure.
Compatibility
Ace
Dive Case
Explore new depths in detail.
Dive down to 197ft.
The purpose-built sealed structure lets you shoot as deep as 197ft (60m) without worry.
Clear optical glass lens.
Provides higher transparency than a plastic lens to guarantee detailed shots. Coated to reduce light reflection and warping and improve hydrophobic performance.
Locked in.
Easy-to-use waterproof dive case with a sturdy buckle lock design to secure your camera.
Performance guaranteed.
Designed and tested to protect Ace and enhance underwater image quality.
In the Box
1x Ace Dive Case
1x Protective Pouch
8x Anti-Fog Inserts
4x Anti-Slip Rings
Specs
Weight :
101g,+3g(3.6oz,+0.10z)
How to Use
1. Open the Case
Hold the Dive Case with the Lock Lever arrow pointing to the right(@). Push the Lock
Lever to the right and push the buckle down(@). Unlatch the buckle from the
hook()open the Dive Cas(@).
2. Attach the Anti-Fog Inserts
Attach the Anti-Fog Inserts, ensuring they are inserted as shown below.
Note: If using third-party anti-fog inserts, ensure the size of Anti-Fog Insert 1 is within
20x15x1.2mm, and Anti-Fog Insert 2 is within 40x15x1.2mm. If the inserts are too
large, they may cause water leakage and damage the camera.
3. Insert the Camera
Be sure to insert the camera in the correct direction so the buttons are properly
aligned.
Note:
1. When using the camera in water, please lock the touchscreen to avoid
accidentally pressing the screen.
2. When inserting the camera, take care not to scratch the lens.
4. Close the Case
Latch the buckle onto the case’s hook and firmly push down until it clicks
Note:
1. Ensure the Dive Case is firmly closed. Be sure that the parts of the Dive Case in
contact with its rubber seal are free of dirt or dust.
2. For the best results, keep the lenses of the Dive Case clean.
5. Attach the Anti-Slip Ring (if needed)
When connecting the Dive Case to other accessories, such as the Floating Hand
Grip, stick an Anti-slip Ring to the screw points to reduce the risk of vibrations
loosening or damaging your case.
Notes
Before using the Dive Case, please update your camera’s firmware to the latest version.
Improper maintenance may affect product performance. Each time before placing the camera in the Dive Case, it’s suggested to latch the Dive Case (without the camera inserted) and immerse it in water to check for leaks.
Before sealing the Dive Case, be sure that the parts of the Dive Case in contact with its rubber seal are free of any foreign objects (dirt, dust, sand, etc.). Make sure the rubber seal is correctly aligned, broken or twisted.
The Dive Case is not shock-resistant. Applying strong vibrations, shocks, or pressure to the product may result in damage, failure or reduced waterproofing performance. The recommended maximum dive height is 2 meters (6.56ft) above water level when diving into water. The Dive Case protects the camera when dropped on solid surfaces from a maximum dropping distance of 1 meter (3.28ft).
Do not open the Dive Case while it is wet.
After using the product in seawater, remove the camera and ensure the Dive Case is firmly closed. Soak the Dive Case in freshwater for 5-10 minutes, then gently rinse it under the tap.
Do not store the Dive Case in a hot and humid environment like a hot car. Do not wash the Dive Case with soap, neutral detergent, organic solvents or alcohol cleaning products, as this may degrade the waterproofing performance.
