คำอธิบาย
Insta360 Third-Person Bike Handlebar Mount ของแท้
The ultimate tool for epic, third-person cycling shots.
Shoot in 360 and watch the extension pole disappear in the shot! Capture hands-free selfies, follow shots and more.
Strong and lightweight.
Aluminum bracket and carbon fiber pole are super durable for long-term use and minimal camera shake.
In the Box
1x Handlebar mount
1x Carbon fiber extension pole
1x Thumb screw
1x Washer
Specs
Material
Aluminum alloy
Weight
Bracket: 149g (5.3oz)
Carbon fiber pole: 17g (0.60z)
Dimensions
100x80x90mm (3.9×3.1×3.5in)
Pole length
250mm (9.8in)
Notes
1. Handlebar clamps fit 25-32mm diameter tubes.
2. Maximum recommended speed with the camera mounted is
60km/h. Do not use in strong winds or on bumpy trails/roads.
3. When installing, ensure the extension pole and front side of
the camera are parallel to the ground. This improves image
capture and stability.
4. This mount is suitable for a variety of Insta360 cameras
(including but not limited to ONE X2 and ONE RS).
5. Please follow the instructions in the manual when installing/
using this product. Do not connect a selfie stick or other
accessories unless stated. Product failure or damage caused
by not following the instructions will not be covered under the
warranty. After use, don’t forget to remove the camera from
the mount and store it safely.
6. The Third-Person Bike Handlebar Mount has two additional
connection points: a 1/4″ screw and a 3-prong mount. The
weight of the accessory connected to the 1/4″ screw must
not exceed 300g (10.5oz). Only the carbon fiber extension
pole provided in the box can be connected to the 1/4″ screw
for extensional use. The 3-prong mount can only be
connected to accessories with a 2-prong mount, and the
weight of the connected accessories must not exceed 300g
(10.5oz). No extension equipment can be attached to the
three-pong mount.
