คำอธิบาย
Insta360 Bike Computer Mount Independent Handle bars ของแท้
Unlock new perspectives and take your cycling shots to new heights.
Available for both integrated and independent handlebars.
Effortlessly mount any Insta360 camera, bike light, and bike computer. Comes with a 1/4″ screw, 3-prong mount and bike computer base.
Compatible with bike computers from Garmin, Wahoo, Bryton, Giant, and more.
High-strength aluminum for stability every ride.
Bike Computer Mount.
More angles, cleaner setup, immersive footage.
Fresh perspectives.
Explore dynamic angles with third-person footage or thrilling POVs.
Keep it tidy.
Mount your camera, light and bike computer in one place and keep your handlebars clutter-free.
Built to last.
High-strength aluminum for reliable stability on every ride.
Custom fit.
Available for both integrated and independent handlebars.
Compatibility
X4
GO 3S
Insta360 Ace Pro
Insta360 Ace
GO 3
X3
ONE RS (Twin/4K)
GO 2
ONE X2
ONE R
ONE X
In the Box Bike Computer Mount (Independent Handlebars)
1x Bike Computer Mount Main Piece
1x Thumb Screw
2x 40mm M5 Bolts
2x 30mm M5 Bolts
2x Long Screw Posts
2x Short Screw Posts
4x Anti-Slip Rings
1x 4mm Hex Wrench
1x 2mm Hex Wrench
1x Garmin Computer Mount
1x Wahoo Computer Mount
1x Bryton Computer Mount
1x Giant Computer Mount
2x Computer Mount Screws
Specs
Bike Computer Mount (Independent Handlebars)
Material:
Aluminum 7075-T6, plastic, stainless steel
Weight:
120g (4.20z)
Dimensions:
115x53x28.5mm (4.5×2.1×1.1in)
ㆍThe spacing between the holes of the Bike Computer Mount is
11-39 mm.
How to Use
Bike Computer Mount (Independent Handlebars)
1. Select a Computer Mount according to your model, then
install onto the Bike Computer Mount, and tighten the screws
with a 2mm Hex Wrench.
Tips:
ㆍThere are 2 mounting directions for a Computer Mount,
which can be installed as needed.
ㆍComes with 4 types of Computer Mount, to support mainline
brands. Select which mount supports your computer.
2. Install the Bike Computer Mount to the front of the bike and
tighten the bolts with a 4mm Hex wrench.
Notes:
ㆍThe Bike Computer Mount can be installed on the upper or
lower side of the front of the bike as needed. Remove a pair of
bolts (upper side or lower side) from the bike, select 30mm or
40mm M5 Bolts according to the length of the hole, and use
either the long or short screws and their posts to mount the
accessory over the centre of the bike, ensuring the bolts are
completely fastened and flush with the post. If you are not
sure which bolt to use, try the long bolt first. If the long bolt
does not fit, replace it with ashort bolt.
ㆍ When installing, pay attention to the direction of the bolts, so
that the bolts are installed directly into the Screw Posts.
“When tightening bolts, if using a torque wrench, 5Nm is
recommended, otherwise tighten to ensure mount is firmly
attached to the handlebars.
ㆍ The spacing between the holes of the Bike Computer Mount
is 11-39 mm.
ㆍEnsure that the two bolts are both locked on the Bike
Computer Mount. If there is only one bolt hole on the
handlebar, or the spacing is not sufficient for the installation
of the Bike Computer Mount, do not use the mount, as this
may fail and causedamage to your camera.
3. Install the camera (or accessories such as a flashlight) on the
1/4 “screw or three-prong connector of the Bike Computer
Mount.
Notes:
ㆍIf installed on the 1/4” screw, lock the mount firmly during
installation.
ㆍ If the three-prong connector becomes loose after
installation, attach Anti-Slip Rings for reinforcement.
ㆍThe angle of the three-prong connector can be adjusted after
loosening the screws on the base.
4. Install the Bike Computer on the Computer Mount.
Notes
1. Do not mount a selfie stick on this accessory. Mount the cameras directly.
2. When installing devices on this accessory, the maximum load is 500g (17.6oz). Do not
exceed this weight.
3. Before riding, check and confirm that all screws, bolts, and cameras are locked to
prevent issues.
4. It’s suggested to keep your speed within 60km/h (37 mph) on flat roads. It is not
recommended for use on bumpy roads.
